diff search

[taka21]

just wondering if there is an 8" rear pumpkin that we can use in our cars that anyone knows of

 

[CT26smoker]

The MkIII is an 8".
So what are you asking ?

 

[bioskyline]

looking to change your gear ratio?

 

[taka21]

The MkIII is an 8".
So what are you asking ?

mk3 supras have a 7.5" rear not an 8"
and thus no one makes a spool for our rear as yet if it was an 8" there are several to choose from

---------- Post added at 12:41 AM ---------- Previous post was at 12:39 AM ----------

looking to change your gear ratio?

yes but more importantly i want a full locking spool but no one makes one for our 7.5 rear

 

[hvyman]

No you cant swap a ford into our pumpkin. You want another diff you swap it in which means straight custom.

Jawsgear makes diff with a 3.55 gear ratio. Thats about it. you can get kazz trd and some others. No real need for huge after market on that since stock is prolly stronger than r154.

 

[bioskyline]

mk3 supras have a 7.5" rear not an 8"
and thus no one makes a spool for our rear as yet if it was an 8" there are several to choose from

i looked at my axle tag on my supra, which is G285. according to my toyota axle sheet, the G series axles are 8 inch.
the mk2 supra has the F series diff, which is 7.5. the mk3 has the 8 inch diff.

http://www.toysport.com/technical information/toyota differentials identifications.htm

the v6 4runners use the same carrier, pics and info on the link http://www.4x4wire.com/toyota/tech/supra_lsd/

 

[taka21]

i looked at my axle tag on my supra, which is G285. according to my toyota axle sheet, the G series axles are 8 inch.
the mk2 supra has the F series diff, which is 7.5. the mk3 has the 8 inch diff.

http://www.toysport.com/technical information/toyota differentials identifications.htm

the v6 4runners use the same carrier, pics and info on the link http://www.4x4wire.com/toyota/tech/supra_lsd/

so then this piece should work just fine then right ?
http://www.marlincrawler.com/differential/locker/spool-locker/spool-hilux/spool-8-v6

 

[PureDrifter]

so then this piece should work just fine then right ?
http://www.marlincrawler.com/differential/locker/spool-locker/spool-hilux/spool-8-v6

knowing MC you should be able to just call them (and/or jawsgear) to confirm if it will work or not.

though if you want a spool and arent throwing a bajillion torques at it you would be fine just welding the diff....

 

[IJ.]

Seem to remember Jawsgear saying the offsets are wrong and it won't fit.

No you cant swap a ford into our pumpkin. You want another diff you swap it in which means straight custom.

.

But there IS 1x 9" available

 

[te72]

You still have that thing IJ? Figured one of the drag guys would have picked that up by now...

 

[SupraSean]

JawsGear actually makes quite a few Ratio's for our diffs. you can get them up to like a 5:71 or something crzy like that

 

[taka21]

Seem to remember Jawsgear saying the offsets are wrong and it won't fit.


But there IS 1x 9" available

where and how much i want it lol

 

[IJ.]

where and how much i want it lol

Drop me a PM