Did some tuning on my car 516HP

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
So i finally got around to getting a decent tune in my car. Heres the vid and sheet.

[video=youtube;xdhD-ksAXPQ]https://www.youtube.com/watch?v=xdhD-ksAXPQ[/video]

Looks like i need to rev higher then 7000rpm. :love:
 

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
Haha its in the video but ill leave this here anyway. It looks funky at 5k because thats where it "loaded" the rollers. Oh and thats only 20psi.

p2010165_1.jpg
 

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
Question for those who know. Do you brake boost the car before hitting start button so that the low end numbers are realistic? The dyno didnt load the car at all untill it started to make boost, thats why it looks so laggy. But on the street i easily see 5+psi at 3200ish. If i hit the trans brake i can have 10+psi under 3500rpm. I was wondering if when i go back i should brake boost it to just get a little bit of boost up so that it loads earlier (hopefully, not sure how it knows when to load) so i can get a full run on boost rather then just 5krpm and up.
 

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
Thanks man! Bone stock 2JZGE, with bc272's springs and retainers and a 1.8mm head gasket. A Precision 6466, custom FFIM, and 3" downpipe to a 4" exhaust.

Can't wait to fix my diff and go back. Hoping for 550-600 on 25psi.
 

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
Yota: Thanks dude!

Pirate: All of them were on the diff before it started making noise. Once It started screaming I stopped. Didn't know I had a problem till then. :(
 

Tariq

New Member
Mar 3, 2014
3
0
0
Massapequa, NY
That exhaust sounds nice and clean...
Dynoed At Mustang Magic :)

I think I need to get some money together and get my 2JZ swap started this winter...
Your car is very nice !

Good Luck With It !
 

TurboStreetCar

Formerly Nosechunks
Feb 25, 2006
2,778
13
38
Long Island, Ny
Thanks! Yea the guy that runs the dyno at MM was cool. Thats why i went there. He actually talked to me like it was my car and we could do things the way that i wanted to.