Did i install my blow off valve right?

[UpbeatFish]

i just bought this hks sqv and i wanted to see if i did this right.

heres pictures. feed back please. btw its not loud at all =////

http://www.youtube.com/watch?v=9pC8xKvKDzI

thanks guys. i would of rather gottin an tail but this one was freeeee =]]

 

[IwantMKIII]

mmm why is the stock BPV on there? the HKS should be replacing that. Its partly why its not "loud". It should be quite loud vented to atm like that.

 

[enjoi.this]

Remove the stock BPV and two rubber hoses. Plug the hole on the 3000 pipe. Get yourself a recirculation fitting for the sqv and route it back to where the stock BPV connects to acordian pipe. Shorten up that vac line going to the sqv too, thats way too long.

 

[Zumtizzle]

Loose the stock bypass valve and report back with a smile.

 

[Kckazdude]

What is going on here? I see the fatory IC rubber pipe. Then looks like adaptor rubber pipe just jammed into the factory pipe.

Also follow advice of ChrisC above.

 

[tbcmorris]

no stock bypass, clean up your pipping im suprissed you dont have a boost leak and definetly shorten the vac line up turning the bov around should help

 

[Bigdough666]

Pretty much what everyone said, ditch the stocker, fix the pipes and vacuum line, etc.

I run the older HKS SSQV and its LOUD. A friend of mine has a new one like yours on his 1G DSM and its LOUD. So yea, fix all the stuff mentioned in the thread and you will get the sound you are looking for.

 

[UpbeatFish]

im sad . i pluged the two hoses but still not as loud. seems quieter haha
w.e im happy with it. thanks guys!!!

=]

 

[tbcmorris]

Not a good way to plug lines, and why do you still have that T.

 

[CyFi6]

Is that electrical tape over your vac line Tee?

 

[UpbeatFish]

i have a plug in there and i like wrapping elec tape just to make sure it doesnt rip or anything

 

[supraman7mgte]

A for effort, F for everything else!
Do it right and report back!

 

[tbcmorris]

I know there a plug.....still no good

 

[IJ.]

i have a plug in there and i like wrapping elec tape just to make sure it doesnt rip or anything

UpBeat about to work on his car>>

 

[enjoi.this]

UpBeat about to work on his car>>

bahahahaha :biglaugh:

But seriously, do it right upbeat you will be so much more pleased with what you have when its right. Your bov probly doesnt make any noise because of massive boost leaks in the ic piping.

 

[eman2289]

Why is the tee even in there? You should have used that long vac line and just put it right to the source, not needing the tee. And get real caps in order to cover the stock bpv hole. And get a fan shroud too.

 

[UpbeatFish]

dude thats how someone told me to do it on here.
wth everyone is telling me to set it up a different way.

now im pretty sure its supposto have a hose from where i plugged it at cuz ive seen supras like that. but im not sure thats why i came here.

 

[UpbeatFish]

oh and for that vac splitter thing. the bov came with this plug that you install the thicker hose then it exports it into the thinner one. well when i was putting it on i noticed that it was broken. it literally fell apart in my hands. thats all i have to replace it.

 

[BlackDevilSupra]

I would revert back to your original setup, with the OEM BOV in place. With the OEM BOV still present, it'll help minimize the drivability issues when venting to atmosphere.

 

[tbcmorris]

i know thius is a heated debate. i have a tial no tuning device (anymore it was stolen when my car was) i have never had stalling issues ever.