ct-26 c-clip that holds actuator rod on the waste gate

[cartert]

I lost my c-clip, the one that hold the actuator rod on the waste gate. Does anyone know what size this clip is or where I can find a replacement?

Thanks!

 

[Supraeazy]

I believe I found mine in a bin of old carburetor parts. I think some throttle cables/rods use them in conjunction with the linkage. Dont know if that helps but you can always try finding an old carb and see.

 

[MK3pizzadriver]

Here's enough of them to last the rest of your life lol
http://www.amazon.com/Neiko-E-Clip-Shop-Assortment-Clips/dp/B000K7GRDW/
(at least I think they'll fit, might need to close one down a bit with some pliers)
Just add a pair of pants or something to make your order qualify for free shipping.

Or bring the linkage to your local auto parts store & they should have a bin of them behind the counter, or some in the general repair parts section. Oh yeah, and a hardware store should have bins of individual c-clips.

 

[Boosted MK3]

Bought a replacement for mine at Home depot

 

[Enraged]

Mine was corroded on, had to cut it off. I bought a replacement from the local Toyota dealer, it was $2-3 I think. Expensive for what it is, but not worth the trouble of searching for the right size at a parts store.

http://www.cygnusx1.net/Supra/Library/EPC/291410/catalog.aspx?F=1701&P=3

PN: 90523-04002

 

[cartert]

Thanks for all the replies, seems like I should be able to find one pretty easily.