My CT26 smokes randomly, like it will run fine on start up and not smoke. But after 10 mins of driving it'll smoke like a firecracker.
Shut it off, wait 5 mins; turn it back on and no smoke. :icon_mad: Drive it around for another 5-10 mins and it smokes again. Sometimes it doesn't smoke for 30 mins!
If the seals were truely bad, wouldn't it smoke all the time?
Maybe my oil return line is bad?
Here is how my oil return line looks like. The stainless line I bought was too long and I didn't want to cut it so it curves down a little and then back up to the oil pan.
I'm thinking after driving the oil gets backed up where the return line curves and when I let it sit for 5 mins; that allows the oil to drain back into the oil pan. Dunno, what do you guys think?
Note: ct26 is being used on a 5sfe engine.
Shut it off, wait 5 mins; turn it back on and no smoke. :icon_mad: Drive it around for another 5-10 mins and it smokes again. Sometimes it doesn't smoke for 30 mins!
If the seals were truely bad, wouldn't it smoke all the time?
Maybe my oil return line is bad?
Here is how my oil return line looks like. The stainless line I bought was too long and I didn't want to cut it so it curves down a little and then back up to the oil pan.
I'm thinking after driving the oil gets backed up where the return line curves and when I let it sit for 5 mins; that allows the oil to drain back into the oil pan. Dunno, what do you guys think?
Note: ct26 is being used on a 5sfe engine.
Last edited: