C's Short Shifter

[JASONA70]

the clip i bought came with the C's short shifter, i know short shifters are stiff but this shifter gives me blisters! what do you guys think about the shifter?

 

[mattjk]

those suck. sell it to me.

Seriously though, try dropping some tranny lube down in there... it's prolly all gunked up.

 

[JASONA70]

those suck. sell it to me.

Seriously though, try dropping some tranny lube down in there... it's prolly all gunked up.

they have tranny lube?! i just use auto. greese :nono: these things go for like 400 bucks on ebay. besides the stiffness i think this shortshifter works great. i think its almost 50% faster shifting than the stock.

 

[mattjk]

tranny lube, oil, same crap.

why would you put grease inside the tranny? good way to contaminate your tranny oil.

 

[suprastanger507mgte]

I have it on my car, and I love it. No blisters, only got them while jerking off to it.. lol...
Like Matt said, you may want to pull it out and check the bushings and stuff.Also lube it

 

[JASONA70]

tranny lube, oil, same crap.

why would you put grease inside the tranny? good way to contaminate your tranny oil.

i was talking about the bushings :aigo: why would i stick greese into the tranny oil ! thats insane!!! :barf:

 

[mattjk]

i was talking about the bushings :aigo: why would i stick greese into the tranny oil ! thats insane!!! :barf:

I give up.

 

[MDCmotorsports]

I think you need to send it to me so I can copy the damn thing...

 

[loki2043]

copy and sell at 50% of price ftw!

 

[tonysupra]

^^ i agree. MDC- you're a business, mannn.

 

[Clip]

send it to mdc.

you replaced all your bushings yet? if not, take it out and clean it up real well, put new bushings in and then give it a week. itll be silky smooth after (hopefully)

 

[Doward]

+1 on sending it to Jon @ MDC!

 

[s383mmber1]

PLEASE SEND IT TO MDC!!!!!

Ill give you five bucks. Really.

 

[Yellow 13]

Send it to China and let them copy it.

 

[Clip]

[thread derail]
speaking of copying, you guys seen those printers that can spray a working 3d model/prototype (to scale) from a cad drawing on a computer?
[/thread derail]

 

[Yellow 13]

[thread derail]
yes
[/thread derail]

 

[NashMan]

i don't like the c shifter the ball is to small aka knuckle

 

[tubbie]

Send it to China and let them copy it.

There you go!!!! That way it will only cost $50 :bigthumb:

Damn Chinese are masters at copying stuff...... + the cheap labor... :biglaugh:

 

[JASONA70]

i am actually am currently taking classes to become certified to model commercial parts.. ill pull this puppy out and take some measurements and model this thing up and post it. if anyone wants to get it machined be my guest. ill bring it to my machine class to see if i could try and copy this thing.:aigo:

 

[Clip]

:bigthumb: