crap !

-jdmmk3-

slip n slideeee
Mar 23, 2006
66
0
0
: las vegass :
well this mourning on the way to the gym my clutch blows out had it towed back to the house now just deciding on what clutch to reaplce my stock one with any suggestions ? nothing big its a daily simple dp, full 3` exhuast, intake, bov
 

thebuddrik

New Member
Jun 2, 2007
149
0
0
46
Lafayette ,La.
what went out? i assume you r talking about changing the pressure plate and disk. if that is what u r talking about i recommend rps stage II. that is what my old car had. my current car has act 6 puc and i hate it, way too harsh for daily driving.
 

-jdmmk3-

slip n slideeee
Mar 23, 2006
66
0
0
: las vegass :
yeah pressure plate n disk thanks guys ima look into these today n let you know the decision thanks guys for the help i appreciate it.
 

MassSupra89

Almost done.
Nov 3, 2005
1,707
0
0
MA
I have an XTD pressure plate and 6 puck disc. It's pretty much a stock PP with an upgraded disk. I didn't use it because I was looking for more than 500rwtq. Should be great for your power though. Shoot me a PM if you're interested.
 

thebuddrik

New Member
Jun 2, 2007
149
0
0
46
Lafayette ,La.
all i have had is the 2 i talked about above. the guy i bought my car from put the 6puc in a stock car(dont like it). my old car had 3" tubro back and with that rps i could lock down and melt tires any time i wanted to (and i did it a lot) the only regret that i had was not getting an after market flywheel (my old one didnt need resurfacing or anything)
 

ViR2

Supraniac
May 20, 2006
932
0
16
37
Lithuania
www.hpaddict.eu
Just a RPS clutch like this and forget about it :) Dont put puck clutch in a DD, you will hate that after your first 100miles. And that organic clutch should hold enaugh power for a slightly moded car as well and it would be also safer for your tranny ;)