CPS trouble!!!! Need help!!

[ma70torres]

Do i have to use the ground to ECU for the CPS?(Cam Position Sensor)

The ground wire on the harness is green inside and I've clipped off about an inch. I used my meter to check the continuity to ground and nothing. And also the TSRM shows A red, black, yellow, and light blue wire. On the car (cps side)I have red, green,yellow and tan/whitish. (harness side)red,black, blueish black, and brown.WTF? How do i figure out what wire goes to what?

Any help would be awesome.... thanks guys!!

 

[ma70torres]

OK, well i got the CPS fixed. But still no spark. I went through the TSRM and put 3volts to the igniter and still no dice. Also at the connector to the coils theres 12 volts but on the wrong pin. What now???

Bump!!

 

[ma70torres]

Thank guys!!! shes ALIVE!!!ALIVE ALIVE!! lol OKay so it was just the wiring to the CPS that was jacked up!! My 87 had a separate harness going to the CPS and that threw me off for a few days. Johnathan1 had already posted his wiring harness color so i got it from him. Again thanks again.....