CPS Has no marking for TDC?

[Datsrboi]

I was reading the other post.. YES I SEARCH and got how to align TDC on the CPS..... I looked at mine and it has no marking for TDC so I do not know exactly where TCD on the CPS is only near.... Is there something wrong here?

 

[dugums]

AFAIK you just line up the drilled mark on the gear per the TSRM (take out the cps to do this) and insert the CPS. Then time it with the diagnostic block jumped per the TSRM.

 

[jetjock]

Actually it's pretty obvious in your picture if you know how the thing works. Otherwise what he ^ said. If all else fails you can always RTFM...

 

[mhopemk3]

If your at 0 TDC in this pic then you should be good.

 

[Datsrboi]

If your at 0 TDC in this pic then you should be good.

My car was never Timed in correctly. Thats why I am asking.

 

[mhopemk3]

My car was never Timed in correctly. Thats why I am asking.

How was it not timed correctly? Are the cam gears in line with the rear plate? Is your crank set on 0*?

 

[Datsrboi]

How was it not timed correctly? Are the cam gears in line with the rear plate? Is your crank set on 0*?

If I line the crank to "0" TDC both cams are off from their marks. The car came like that. I'll figure this out. thank you guys.

 

[jdub]

In that case, sounds like you've jumped a tooth on the timing belt.