CPS and "non reusable parts"

[TurboStreetCar]

If this helps its a place that sells the seal, bearing, outer o-ring and pin for the gear all together. Doesnt come with the gear but it comes with everything else.

http://kbox.ca/catalog/product_info.php/cPath/47/products_id/252

 

[adampecush]

If you are competent with a drill press, you should be able to disassemble without mangling the gear...so that kit would be perfect.

 

[TurboStreetCar]

The only hard part i saw about not damaging the gear is bieng able to hold it in something while you hammer out the pin.

 

[Kai]

Nosechunks - thats almost perfect!

 

[TurboStreetCar]

I can't take all the credit It was posted in another thread about rebuilding the CPS. Can't recall who off hand though.

 

[adampecush]

The only hard part i saw about not damaging the gear is bieng able to hold it in something while you hammer out the pin.

aluminum jaws in vise is the answer to that.

 

[TurboStreetCar]

Eh, i wouldn't trust just aluminum jaws, i would still want a very healthy layer of cloth of some sort, Maybe even wood. On the teeth of a gear, i wouldn't want any metal directly contacting them with any type of force or pressure.

I just threw mine in a vice, but i had another gear to use after i beat the pin out of the old one.

 

[IJ.]

You don't put the teeth on anything Dan.....

 

[TurboStreetCar]

Well since i had another gear i clamped on the teeth of the gear so that when i was beating on it i was holding, and beating on the same object.

I felt if i clamped the housing i would have a chance of bending the shaft leaving me SOL. It also held the rotational position of the shaft so the pin stayed vertical.

 

[IJ.]

I drill the peened part of the pin with a +2mm drill to remove the head then
I find a nut/bolt whatever that's +1mm to the pin size tighten the vice with soft jaws on that then position the CPS so the non toothy part of the gear is resting on the jaws then use a correct size pin punch (-.5mm) and drive the pin out.

 

[TurboStreetCar]

Yea that would be another "dont fuck up the gear" way to do it. I had another gear so i figured fuck it. :Biglaugh:

 

[fixitman04]

who still has the whole remanned cps, i know napa,carquest and oriellys do not! they all list it as nla.

 

[TurboStreetCar]

Who ever does would prolly get a pretty penny for it!