Any body know the tq specs for the bolts holding the compressor housing to the center cartridge? This is on an sp61gt, but id imagine any aftermarket turbo would be similar (at least any garrett cold side). I want to clock it a bit differently but want to make sure it goes back on tightly with out over doing it...
So far ive seen 100in lbs and then 180-200 inlb's...
just to be clear, im wanting the tq specs for the 6 or so bolts that can be seen on the back of the compressor cover here...
So far ive seen 100in lbs and then 180-200 inlb's...
just to be clear, im wanting the tq specs for the 6 or so bolts that can be seen on the back of the compressor cover here...
