clutch reviews

[dsm_tuner260]

what kind of clutch does every one run?
im looking at gettin the spec stage 4-6 just looking for peoples opinion on clutchs which ones you like and which ones not to get.

 

[Crypton2006]

I ran a Centerforce Dual Friction for along time with a CT60-1 at about 12-14 pounds, never had a problem with it. Im running a modified dual friction cluch with my current setup with no problems (mods in sig). Centerforce is located her in my town hence the loyalty.

 

[enjoi.this]

Ive had good luck so far with an action 6 puck clutch. Its been beaten on pretty hard but still hasn't even thought about slipping. DM says its good for 500hp or something.

http://store.driftmotion.com/static/i-action6puckr154disk.php
http://store.driftmotion.com/static/i-actionpressureplatestage3forr154.php

 

[gennro]

I use a ACT 6 puck ceramic sprung with a ACT pressure plate and I love it.

 

[rtrdpenguin]

I love my ACT 6-puck with the HD pressure plate. It's so easy to drive and never slips and holds up to tons of abuse

 

[I6Boost]

what kind of clutch does every one run?
im looking at gettin the spec stage 4-6 just looking for peoples opinion on clutchs which ones you like and which ones not to get.

Its really based on your rwhp goals man.

But yea Spec Stage 4-6 are pretty good, && DM sells some pretty nice kits that
go with them.

Anything but generic.

 

[enjoi.this]

If you havent read already but 6 pucks do chatter a bit when backing up and sometimes when down shifting. Just takes a little practice to get the hang of then no problem.

 

[gennro]

If you havent read already but 6 pucks do chatter a bit when backing up and sometimes when down shifting. Just takes a little practice to get the hang of then no problem.

Yeah mine does that. Other then that though I can't complain and it grabs every gear instantly.

 

[dsm_tuner260]

im goin to need a clutch that can take the abuse. im lookin at 450- 500whp. i just looked at the dm ones and i might order from there just need to get the engine and a few things set up before it goes in so after i get it all set up then ill decide what clutch ill be running.

 

[atlpd3147]

what clutch would be good for 600-650hp?

 

[87supradude]

spec 4 here, chatters in reverse but holds like a sumbich. probably wouldnt be as bad if I had the flywheel turned but I just pulled the motor after about 6000 and there is little if any glazing.

 

[Treecesmk2supra]

i was looking at a fidanza 4.3 ,6 puck kit.... i just got this car and the guy said it had f1 racing (ebay) clutches...and they slip soooo bad!!! :nono: but my 7mgte is stock. besides a hoss of a intercooler, hardpipes, and boostin 10 psi, with a full 3in megan racing exhaust. hope this clutch holds..it says up to 477 pounds of torque.., but i plan on gettin round 400-500hp someday, and dont want to buy another clutch when i do the mods....:naughty: