clutch pedal firmness

[Moy]

I recently test-drove a M/T MK3, and when I went to engage the clutch, I had to put the pedal all the way to the floor.

Is this normal or should the pedal be more firm?

Thanks guys

 

[Nomad707]

probably out of adjustment or needs fluid.. is it super easy to push in?

 

[Moy]

Yeah

 

[Nomad707]

check fluid level and check to see if the slave cyl is leaking.. is your master cyl leaking at all?

 

[Moy]

I'm not sure. It's a MK3 I'm looking at buying, I can ask the seller tomorrow.
I looked at the master and it looked to be pretty full. Also, when I checked under the car for leaks I found no spots on the ground.

 

[Nomad707]

then the fluid may be bypassing inside the master cyl. theres a seal that can be letting fluid past, resulting in crappy disengage, OR there might be some air in the system, Hard to tell from my side.. just make sure to check it out thoroughly before purchasing. its not bad replacing the slave cyl or master cyl. How does the clutch feel itself? does it slip?

 

[Moy]

You know, I honestly do not know the answer to that question. It was only the third or fourth time that I'd ever driven stick, so I don't even know what to look/feel for.

 

[Nomad707]

i would bring someone that has driven stick for a while then to see if its slipping..

 

[Moy]

alright, will do.
Thanks

 

[gaboonviper85]

either way it's a cheap fix unless you need a clutch...which isn't all that expensive.