My car will start some times and run just fine but now its not getting fuel. the parts I've changed are... Fuel filter,Pump. How do I check for codes or does my car even have a diog conection? How do I search this site for a good write up on this problem? any help would be great!
Can't get the Supra to start.
- Thread starter albinobmx
- Start date
http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx
That's to check your codes. And just use the search button here to find most of your problems.
That's to check your codes. And just use the search button here to find most of your problems.
HEy im having a similar problem. Check the stupid air flow meter. have someone hold the flap open and see if the car will run. i spent days messing with it and that was the problem
Listen to poodles
Have you checked all the grounds ? I believe theres 5 give or take. Have you tested continuity ? Im pretty sure if you do this youll figure it out yourself
I can see your new here so heres what i suggest. A DIY mechanic should have these basic tools in his tool box (other than the obvious tools such as ratchets with all measurements) Multimeter, timing light, logic probe i might be missing somethings but this is all i can think of at the moment. The last two dont apply here but this is all you basically need to work your way around the car and fix any problems that might occur.
Have you checked all the grounds ? I believe theres 5 give or take. Have you tested continuity ? Im pretty sure if you do this youll figure it out yourself
I can see your new here so heres what i suggest. A DIY mechanic should have these basic tools in his tool box (other than the obvious tools such as ratchets with all measurements) Multimeter, timing light, logic probe i might be missing somethings but this is all i can think of at the moment. The last two dont apply here but this is all you basically need to work your way around the car and fix any problems that might occur.
If you checked all the grounds, check the positive side of things.
Doing any of these checks without a multi meter (and the knowledge of how to use it) is a bit pointless though...
Doing any of these checks without a multi meter (and the knowledge of how to use it) is a bit pointless though...
albinobmx;1865551 said:
Yes, but it isn't going to help you right now. Check to see if power is getting to the PCM.
http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=56