Wouldnt putting them up side down make the nozzle on the wrong side? i thought there was a nozzle that made the injector spray a fine mist. maybe its on both sides??
Can you install injectors upside down?
- Thread starter Reign_Maker
- Start date
He means upside down as in the injector clip points under the rail instead of over it.
What you are describing is backwards, which can't be done.
What you are describing is backwards, which can't be done.
jake just run the wires from the bottom of the fuel rail up through and like that instead of flipping the injectors....it looks plenty clean. thats how we did bills car.
Reign_Maker said:You should come here and help me wire it... And install it... And start it... And....
lol i have enough on my plate here kind sir
Jay, Im sure you would if you could...
Sage, So you have yours rotated around like mine... Have you driven or started the car like that yet?
Sage, So you have yours rotated around like mine... Have you driven or started the car like that yet?
I couldn't figure out what the hell you have been saying all along. Next time, ask if you can rotate it in the rail. Because no, you can't install them upside down.
Florida hippie.
Florida hippie.
whenmunkysfly said:
I thought the same thing...lmao.
Reign...no prob. You can rotate them in any direction you want as long as you don't damage the o-rings.
AF1JZ said:
Mine rotate pretty easy now(after bhg repair). Of course I have a fuel leak as well. Im guessing the injector upper grommits are shot. The rail is torqued down to spec.
spray partten is the only thign to watch out for but after looking at teh nozzle on my rc's there diffent then the stocker if i remmber right
only thig is you have 2 jets being on the bottom instead of 2 on top
now will this cause it to run bad ummm no will you have issue's atmising ait fule ummm mabye since you shooting more fulle some were els in diffent drition cause form what i no the stock injecotrs spary the 2 jet's farther out towords the vavles and the singe forword
the onyl issue i can see is this you may have poorer air fuel mix then what ti was intened to be but under boost i don't think it will be any issue
i knwo this thou in scubby land if you rotora you injecotrs that is bad thing but that diffent engnie all togther
just said fuck meet every one 50 50 and do it side ways lol
only thig is you have 2 jets being on the bottom instead of 2 on top
now will this cause it to run bad ummm no will you have issue's atmising ait fule ummm mabye since you shooting more fulle some were els in diffent drition cause form what i no the stock injecotrs spary the 2 jet's farther out towords the vavles and the singe forword
the onyl issue i can see is this you may have poorer air fuel mix then what ti was intened to be but under boost i don't think it will be any issue
i knwo this thou in scubby land if you rotora you injecotrs that is bad thing but that diffent engnie all togther
just said fuck meet every one 50 50 and do it side ways lol
I did it on a 6MGTE I built with a custom manifold and rail. It worked fine and looked alot cleaner.Reign_Maker said:
