Sorry im getting frustrated trying to figure this out. But im sure someone can help me. Just need the sensors on here labeled... thanks in advance.
Can someone label the sensors?
- Thread starter pandaboi92
- Start date
Ok here goes, top left & right knock sensors, bottom left near oil pump is a oil pressure sensor (connect DM line to 7M pressure sensor to read PSI on your gauge). Two black sensors on head (one by hook) cam position sensor
I think that covers it...
pandaboi92;1531979 said:
http://store.driftmotion.com/static/i-1jz2jz7moilpressuresenderadapterhosefor18nptsender.php
Sorry, this line.
pandaboi92;1531984 said:
take the old sensor off, put that line in the hold, then attach the 7M one to the line and connect the wire from the harness.
You can also hook up the sensor to a adaptor for the oil filter housing.
I didnt have a sensor on my 2j so i used the one on my 1j and it blocked it as i did not have the DM line.
OneJArpus;1532015 said:
You can also hook up the sensor to a adaptor for the oil filter housing.
I didnt have a sensor on my 2j so i used the one on my 1j and it blocked it as i did not have the DM line.
That is certainly a great idea too. The motor I did so far, has the DM line, it is kind of nice how easy it is to access.