Can some one out side the U.S. see if you can get this part, brake ducts

[92nsx]

47791-14900 - Brake Duct Set (includes everything you need) Im not sure if it is both sides or one.
Looks like
47791A-14900 might be the other side.

EPC page
http://www.cygnusx1.net/Supra/Library/EPC/291220/catalog.aspx?F=4705&P=2

I already ordered the lip, but ken said this about the ducts and #

"It comes up as an invalid part number, which means it is either discontinued, or not available through U.S. parts channels. I will order the lip for you and let you know when it gets here."

So I am wondering if I could have some one order it for me outside the U.S. or something like that, if we can still get them at all.

 

[RPSil13]

those look like the ducts for the jza70 lip, right?

if so the part # wont work for a Toyota dlr, would have to be orderd from japan, if its even avail there

 

[funky_monkey58]

How much was that lip Rob?

 

[ma71supraturbo]

Try these part numbers:

47791-14011 (RH 89-92)
47792-14011 (LH 89-92)

That's just for the short rectangular duct. You will need 2 of this bracket: 47794-14010 and 2 of this bracket: 47794-14020 to mount the duct (as well as the bolts which have numbers listed on that page).

But that duct doesn't go anywhere -- to be effective, it needs to connect to the caliper/rotor

 

[adampecush]

I got mine for $220 and change

 

[dbsupra90]

that epc is from microfiche from early to mid 90's. part numbers have changed several times since it was printed. i have yet to find a part number that is still valid from that edition.

that being said, from when i was looking a few years back i was told they were only avail overseas, and not easy to come by.

 

[92nsx]

Try these part numbers:

47791-14011 (RH 89-92)
47792-14011 (LH 89-92)

That's just for the short rectangular duct. You will need 2 of this bracket: 47794-14010 and 2 of this bracket: 47794-14020 to mount the duct (as well as the bolts which have numbers listed on that page).

Thank you I will see if these are available. But Im guessing not in the U.S.
It must go some where...........If not the brake I will make it go there lol

Thank you again for the #'s

I got mine for $220 and change

Where did you find or order yours from? Maybe they can get mine also

that being said, from when i was looking a few years back i was told they were only avail overseas, and not easy to come by.

Hint: that is why I made this thread maybe some one outside the U.S. will read the title



Maybe Ian can get them ??????

 

[suprra_girl]

Ohhh, you mean the lip with ducts we have on my couch

I dunno if the brackets are there though

oh and this lip came on a ga70 not a jz

 

[SrBigbutt]

that epc is from microfiche from early to mid 90's. part numbers have changed several times since it was printed. i have yet to find a part number that is still valid from that edition.

that being said, from when i was looking a few years back i was told they were only avail overseas, and not easy to come by.

Even if the part numbers have changed, they can figure out the new one. But I don't see this part ever existing in our system. Definately only available overseas.

 

[dbsupra90]

Hint: that is why I made this thread maybe some one outside the U.S. will read the title

i only read on a 3rd grade level and i wanted to use microfiche in a sentence.

 

[bryanintexas]

Even if the part numbers have changed, they can figure out the new one. But I don't see this part ever existing in our system. Definately only available overseas.

If they are still available (i.e. Japan), they can be gotten here w/ some research and the proper information. It'll cost though.

I got the lip imported statside a couple of years ago. Listed for around $300, SM member price would be about $220-240.

Your best bet would either be Yahoo auctions Japan or an overseas member where these were available.

 

[92nsx]

i only read on a 3rd grade level and i wanted to use microfiche in a sentence.

:rofl:

If they are still available (i.e. Japan), they can be gotten here w/ some research and the proper information. It'll cost though.

I got the lip imported statside a couple of years ago. Listed for around $300, SM member price would be about $220-240.

Your best bet would either be Yahoo auctions Japan or an overseas member where these were available.

Yep same here, that is why I made the title what it is.

Ian gave me some contact info for Aus. that can order from japan. I already sent a email to them to see if they can get them, but no responce yet

And yep you are correct about the lip price, $234 shipped to me

I will also check japan yahoo auctions, and rinkya.

 

[supradjza80]

:rofl:



Yep same here, that is why I made the title what it is.

Ian gave me some contact info for Aus. that can order from japan. I already sent a email to them to see if they can get them, but no responce yet

And yep you are correct about the lip price, $234 shipped to me

I will also check japan yahoo auctions, and rinkya.

link to a lip being sold?

 

[adampecush]

contact toyota...you can get them straight from the dealer. When I bought mine, there were 7 left in the US.

 

[bryanintexas]

link to a lip being sold?

76851-14050 ...... 3 currently available in the US

 

[92nsx]

link to a lip being sold?

76851-14050 ...... 3 currently available in the US

contact toyota...you can get them straight from the dealer. When I bought mine, there were 7 left in the US.

You want the link to my email??? I dont think so, lol/

Adam and Bryan yep, yep, yep, there was 4 left when I ordered mine so I would guess 3 left now :evil2:


Still looking for the ducts, lets try and not get off the topic at hand to much.

 

[92nsx]

Still looking for the ducts!

If some one not in the U.S. could try and see if they can get them, that would be super duper!

47791-14011 (RH 89-92)
47792-14011 (LH 89-92)

and (2) 47794-14010 , & 47794-14020

As posted in post 4