cams cams cams

[NashMan]

yes but i am not sure there give out spacer ring if they do that be awsome

think i a going to have to call them up i guess

i kinda wana run per bought one's if i can

 

[MRSUPRA]

I have the BC 264 cams. I had to return my first pair.-Car wouldn't idle at all, and of coarse Brian Crower said they were fine. The second set he sent me worked great. I'm making just under 500rwhp at 17psi with conservative timing with a little GT35R.

 

[NashMan]

whats the power band like

 

[MKIII TURBO60-1]

anyone run weld on's on there cams

 

[NashMan]

you mean welded cams i sean poepel run them wiht no issue if the guy that is doing is getting them harded after words

 

[MKIII TURBO60-1]

so why dont more ppl have welded cams and get them heat treated for strength??? or why dont we hear more about them???

 

[MRSUPRA]

The first thing I noticed after installing the 264 cams is how the off-boost power got softer. But there is no decrease in boost response or "lag".
Topend is nice. I have my limiter set to 7200rpms and it pulls very hard all the way through. I can't imagine using these cams with the stock rev limiter.

 

[IJ.]

anyone run weld on's on there cams

I do.

 

[MKIII TURBO60-1]

who did ur weld on's

 

[IJ.]

Local company Wade Cams here in Australia, they're hard face welded so the same shit they use on the teeth on Bulldozer buckets, been running them for years now and there's 0 wear.

Back when I had them done Billets were rare and I didn't want a reduced base circle.

 

[NashMan]

what is done to your head any thing diffent?

and were does the car power fall cause i wana go to 7000 rpm atlest

The first thing I noticed after installing the 264 cams is how the off-boost power got softer. But there is no decrease in boost response or "lag".
Topend is nice. I have my limiter set to 7200rpms and it pulls very hard all the way through. I can't imagine using these cams with the stock rev limiter.