camber problems?

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
i have a 88 na that i just h&r springs and tokico struts on and i cant adjust camber more than like .6 of a degree. it looks like the outside flaps on the rear camber cams are bent out not letting me adjust camber and i was wondering how i go about fixing this should i just hammer them back in place or will that cause the cam to just bend it back again when it puts pressure on?

thank you for any help from anyone
 

Tim

regular member
Oct 16, 2006
272
0
0
CA
I also have the H&R springs, but I haven't had time to throw it on the alignment rack yet. I am also having a camber problem and wearing the inside of my tires. I am curious if their is enough adjustment in the stock suspension to get the proper camber with the H&R springs?
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
i was thinking about jacking the weight off the wheels hitting that lil plate back in place then align it more postive over spec and then drop in to place?
 

Poodles

I play with fire
Jul 22, 2006
16,757
0
0
43
Fort Worth, TX
there is tons of adjustment, though you can get the camber arms form A1 that will allow me adjustment

if the tabs that hold the ecentric are bent, bend em back... and then HAVE IT ALINGED, don't just mess with settings...
 

AaronsSupraMKIII

Supramania Contributor
Jul 27, 2007
254
0
0
52
Athens, AL
Mine pulls to the right pretty bad, so its alittle scary when I am boosting around someone on interstate. Plus I just put brand knew 18" low pro tires on it, and don't want them to wear wrong. The list of problems goes on....:cry:

It seems like everyone else is posting on the problems I am having lately. Either I have everything wrong with my car, or everyone else has the same things going wrong....LOL