Does anyone know who offers a camber Kit for the MKIII front wheels? Not coilovers, but the actual camber bar...
Camber Kit
- Thread starter Nippon-teku
- Start date
Just to be 100% sure of what you're asking can you post a pic of what you mean please?
Doesn't matter if it's for another car.
Doesn't matter if it's for another car.
There are JIC arms if you want to add a pileOneg camber for racing but the A70 front and rear suspension has a good range of adjustment stock so most times you're fine for a road car, only "gotya" here is in the rear if you lower more than 2" you run out of adjustment.
I "corrected" mine by shortening the lower transverse arms 15mm each, this puts the adjusters back in the middle of their range.
I "corrected" mine by shortening the lower transverse arms 15mm each, this puts the adjusters back in the middle of their range.
IJ.;1507106 said:
Oh..Ok A friend of mine used the MKIV arms, and just reversed them to get the wheel to position back to center. Basically he flippeed the left to right.
It's a bit of a hack though and the wheels still end up too close to the back of the car (ie: NOT centered in the wheel opening like normal viewed from the side)
Meaning, I'm not planing to go low so what if I run out of adjustments? I mean a 2 inch drow is normal.
doesnt someone sell adjustable ones? i could have swore i saw some a few days ago just cant remember where:nono:
Ok...good so I should not have a problem like "Ij" said. Oh..and I can't weld, so that an issue.