any of you guys talked or deal or bought something from Spaniard lately? i have been sending message from SF for three weeks now and still haven't heard anything from him. We have an agreement on the camshaft i bought from him. Spaniard or 1JZ_Pwr (SF), pm me.
calling for "Spaniard"
- Thread starter suprace
- Start date
Jostar;1132921 said:
Spaniard is a crook. He takes money from people and promises them items that he does not, in fact, have in his possession.
I have done "business" with Spaniard in the past before.
Sam;1134425 said:
might i add to this that the 2JZ cams he had "machined" were not done even close to right, ive had to redo a couple sets now, the thrust journal was wrong and the oil seal was machined in between a 2J and 1J cam seal
he should be, i waited enough....he sold me a 2jz cams and it wasn't machined + one of the journal bearing where the dowel pin was cracked. he was denying it and he said it just came off from his car. i asked him what seal he used, then he said he threw the old seals already.
i paid 160 for the machining and repair of the cams. i could have bought the bc cams.
he told me his going to pay me or give me 550 injectors for trade instead, but no response fr him.
in other word, this guy can't be trusted, no one word, liar, and doesn't know his crap and the things he sells.......
i paid 160 for the machining and repair of the cams. i could have bought the bc cams.
he told me his going to pay me or give me 550 injectors for trade instead, but no response fr him.
in other word, this guy can't be trusted, no one word, liar, and doesn't know his crap and the things he sells.......
and thats why he was banned
scamming isnt tolerated
shameless plug here, but to anyone reading this, easiest thing to do if you're looking to do 2JZ cams is buy them as is (unmachined) since ive seen a few times people passing off untouched stock 2J cams as fitted for the 1JZ. Send them to me and i will have them done by my shop (which has done numerous sets of these and has all the specs needed to machine to) and by the time you have them done by me, youve spent the same or less than the guys who say they have "machined cams"
scamming isnt tolerated
shameless plug here, but to anyone reading this, easiest thing to do if you're looking to do 2JZ cams is buy them as is (unmachined) since ive seen a few times people passing off untouched stock 2J cams as fitted for the 1JZ. Send them to me and i will have them done by my shop (which has done numerous sets of these and has all the specs needed to machine to) and by the time you have them done by me, youve spent the same or less than the guys who say they have "machined cams"
why not spend a little more instead of paying 150 for used cams 50-100 for machine work. when you can buy new ones for 500$ get more power and more lift and more duration!?
I mean by the time you sepend the money on the 2jz and figure out you aren't happy, you spend the 500 anyways.
I mean by the time you sepend the money on the 2jz and figure out you aren't happy, you spend the 500 anyways.
I bought a LAPTOP from him. He said he'd service it for a year since he was an HP Tech.When it failed his answers were terse to blow me off.My bad move.
No excuse.
No excuse.
I handled my fair share of disputes relating to him. I am glad I was able to help members get things resolved, either by getting them their parts, or refunds. I only wish we could have gotten rid of him sooner.