Bypass The Park & Neutral safety switch
- Thread starter twoaudio
- Start date
- Status
find the circular clip on the intake side of the harness its one of the circular ones that used t be attached to your tranny..
it should have 3 wires almost looks like a smiley face...
I I
_
kinda like that..... jump the two that are I I and that will jump the switch...
it should have 3 wires almost looks like a smiley face...
I I
_
kinda like that..... jump the two that are I I and that will jump the switch...
look at your engine, now go on the right side, under your intake manifold there will be three? connectors there, take the two round connectors, one has six wires on it, the other has three. take your 3 wire plug and cut off the two thicker wires, they are obvious. then splice them together. its easy. now take the six wire plug and take the black wire, and splice it with the remaing wire on the 3 wire plug. thats it. i just got done doing mine
twoaudio said:
3 wire round plug, wht/blk spliced together enable the bypassing of the clutch (ie. pedal pushed in isn't required to start the car) and the blue is 1 of 2 wires needed for the reverse lights. I have the full write up if you need it
- Status