Boost Logic T4 Manifold

[jdemara]

Hey all

Going to be purchasing a boost logic t4 manifold for my 2jz swap in my mk3.
Just wondering if anybody has any positive/negative input they would like to share, or anything i should know before buying such an expensive manifold.

Feedback is much appreciated!

Cheers

 

[whitehat89]

I have not used any of their parts, but living in South Texas and having been to their shop several times, I can say they have a STELLAR reputation locally... you should look up Marc's compound 2JZ Z31...

 

[GrimJack]

Has anyone put one in a Mk3 chassis? Their website - http://www.boostlogic.com/catalog/p...roStreet-T4-Turbo-Manifold-/product_info.html - does say it only fits the Mk4.

 

[Raven97990]

It doesnt fit a MK III, I have tried the MK IV classic RPS, Boost logic and SP F1 manifolds. The boost logic was closest to fitting. Look for a PM from me as well.

Wanted to add a edit- the boost logic was closest to fitting but they all interfered the shock tower with a Garret 32-82R.

 

[jdemara]

I will be bolting on a borg warner 63mm turbo. The 88-75.

 

[GrimJack]

How much did they interfere with the shock tower? I recall a supercharger kit for the old 22R engine that needed more room, so the kit came with a piece to modify the shock tower - a section needed to be cut away, and the new piece was welded in place, leaving an extra inch for the 'charger. Wonder if something similar could be done here?

 

[Raven97990]

I honestly can't remember. If I was smart I could have taken pictures. I just happened to have three of those kits going on customer cars so I thought I'd try them out.

It wasn't so severe it couldn't be made to work with a bfh (big fucking hammer) but I try to avoid that route.

Sent from my X10i using Tapatalk

 

[jdemara]

Well maybe an egay manifold with some modification might be in order. I am able to get the boost logic mani for fairly cheap, but if it wont fit, then no point. I am not interested in spending 1500-2500 just for a manifold either.

 

[Raven97990]

Is that borg warner one with a exhaust housing similar to a precision? If so it "MIGHT" work.

And if you are getting it cheap enough, there is always the buy to reflip- I got a RPS at such a deal I tried to make it work, when ti didnt, I resold for $400 profit.

 

[jdemara]

I am not sure of the exhaust housing as compared to a precision. I just know it will be a .91AR divided with v-band exhaust flange.