Ive seen this on the forums in the jz section and wiring up for a 1j. Can this be used on the 7m? Is it universal just like how a safc is? Just a matter of splicing into the right wires? Im curious because i just found a crazy deal for one on ebay.
Bee*R Rev Limiter
- Thread starter queenskid926
- Start date
I wired mine up using this info.
http://www.supramania.com/forums/showthread.php?t=74363
I know it's for the 1jz, but it tells you what wires you need to hook into. IGF and NE. Yellow goes to NE and Green goes to IGF. So you just need to use an ecu pinout for the 7M and find those wires. The wiring instructions that came with the Bee*R are really general as stated in the link above, but they state that you hook into IGF and NE for almost all toyota ecu's, so in theory it should work with the 7M. I havn't gotten to test mine out yet, but I think it'll work. This is for a MAFT-Pro install, but it gives you a pinout.
http://supra.fadingworld.com/Electr...raphics/7M-GTE/MAFT Pro 7M-GTE SD - 87-88.jpg
Hope this helps.
Ian
http://www.supramania.com/forums/showthread.php?t=74363
I know it's for the 1jz, but it tells you what wires you need to hook into. IGF and NE. Yellow goes to NE and Green goes to IGF. So you just need to use an ecu pinout for the 7M and find those wires. The wiring instructions that came with the Bee*R are really general as stated in the link above, but they state that you hook into IGF and NE for almost all toyota ecu's, so in theory it should work with the 7M. I havn't gotten to test mine out yet, but I think it'll work. This is for a MAFT-Pro install, but it gives you a pinout.
http://supra.fadingworld.com/Electr...raphics/7M-GTE/MAFT Pro 7M-GTE SD - 87-88.jpg
Hope this helps.
Ian
that wat i was saying, in theory it should work, But before dropping the coin i just want to make sure. Your have yours wired up on a 7m?
Yes I have mine wired up and just need to try it, but it won't be for a while. I'm also installing a maft-pro, so I kinda need to tune it first. The Bee*R will work on a 7M, it's just how you wire it is the question. I feel confident in how I wired mine, but I can't tell you if it works yet. I want to try and get my car started this weekend, so maybe if it idles alright, I can set the rev limit really low and see if it hits it. I'll let ya know.
Ian
Ian
