Basic MAF-T help

[supraman502]

I was messing with the hydralics to my clutch, got it all buttoned up, went to start it and now my car wont start. Checked everything, getting fuel and spark. Decided to take the cover off my maft box to see if it was throwing a code, but it doesnt light up at all, any ideas?

The maft is powered off of my ecu, along with my afc and avcr, both the afc and avcr are working perfectly....

 

[supraman502]

oh and my car isnt throwing any codes

 

[supraman502]

anybody?

 

[GrimJack]

If it doesn't light up, you're not getting power. Did you check your fuses?

 

[hottscennessey]

fuses as Grim said, and grounds under the intake manifold.

 

[supraman502]

is there an inline fuse on the maft, I dont remember

 

[drjonez]

is there an inline fuse on the maft, I dont remember

not unless you put one there....

 

[supraman502]

hooked a power directly to it and still nothing (

 

[Intothenight19]

This happend to me, well sort of, the MAF-T didn't work but the car started, the chip that was in the box fried on me, no idea why. I'd try to source out a new chip for the translator if you've cleared up your wiring.

 

[drjonez]

or simply return it for inspection...