Bad CPS connection or Bad CPS... what to do?

[suprafanatic]

car has been running like crap and i know the CPS connection is very bad sometimes car wont start unless the wires are just right and then the car still idles like crap.. and car drives like crap to.. what do i do to fix the CPS??

 

[Supraboostin]

well start by fixing that but did you check if you have any codes?

 

[suprafanatic]

tps code.. but thats been showing up for a while.. even when car drove fine

 

[johnathan1]

Usually the CPS wiring connection problem is inside of the connector...if you cut the connector out, and hardwire it, you shouldn't have any more problems.

I soldered my wires together and it got rid of my starting problem, and made my car idle much smoother, and no more bucking under partial throttle acceleration.

 

[suprahooked]

Codes you said is the TPS, Fix it in your car will run a lot better. Heres a link on how to adjust it.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=101

 

[suprafanatic]

YA.. i'v looked at that web page a million times..lol i still dont get what to do?

 

[dbsupra90]

YA.. i'v looked at that web page a million times..lol i still dont get what to do?

yeah i dont ever use feeler gauges. i just set it using voltage. 0-1v is spec, i usually set them at the middle at 0.5v