AVC-R solenoid problems...

[nerfkhat]

there are three ports on the solonoid. you should look at the book or the manual online to make sure the ports are in the right spots. and connected to the right spots. but i believe there is a setting on it too but not sure. just go www.apexi.com and go the online manuals.

 

[vdragonmpc]

My Apexi AVC-R's solenoid starts vibrating open/close like crazy when it hits boost, driving me nuts. It was working when I was running my twins, but now gone single turbo. I had to re-wire it back in a second time, maybe I messed up the wiring? I have a S-AFC II hooked up in there two. Any idea's people?

Just as a heads up you CAN call Apexi... They were very nice with me and my set up. Nobody really could answer why mine was tapping like mad under boost. I had the rubber under it and realized I needed to loosen it up some. I ended up using lock nuts and the rubber it still ticks but not as bad.

With the windows up and the radio off I hear it all the time under boost. Im boosting 12psi and when its working it ticks... You can turn it off under boost settings A/B/off and it wont tick when off.

V