Auto to Manual Question

[Pyrite]

I have posted about this before but I know more now than I did then. I performed an auto to manual swap. I also switched to a manual ECU and wiring harness. With those last two details in mind how do I get my car to start from the Key? As is I have a wire hooked to the selonoid that I just touch to the battery to get it started this is ghetto and I hate it. The round three wire plug on the intake side that used to goto my tranny is not there. I have found many threads about this swap but none used a manual wiring harness. Starting the car from under the hood is getting real old and I feel like people are going to call the cops, any pictures advice or links to threads is much appreciated.

 

[pogoism9]

find the diagram for your year of harness and look for the clutch switch wiring. That will guide you in the right direction.

 

[honestabe]

Do a search for 5-speed swaps and you will find everything you need.

 

[IwantMKIII]

probably the clutch switch

 

[vIetDrIfTeR]

i have a question so i found a 89 na manual supra in the junkyard.. i want to make my mk3 auto turbo to manual.. will the inside car na supra harness work with my turbo inside car harness..i was thinking of swapping wiring harness inside the car so i will able to use the neutral start and cruise control properly

 

[rakkasan]

Holy Dead Thread Batman! Sorry, what exactly are you asking again? You do know that a N/A and turbo transmission are different, correct?

 

[vIetDrIfTeR]

ya i know that but is the wiring harness inside the car different between the two?? because i want the the use of the neutral start sensor and cruise control sensor to work properly when i do the manual swap

 

[bioskyline]

as far as i know the internal harness is the same. but thats alot of work to replace that.

 

[vIetDrIfTeR]

the neutral start and cruise control doesn't interfere with the ecu or anything?

 

[bioskyline]

i dont believe so no. cruise has its own mini computer, and the neutral start is just a interupt switch on the main starter wire

 

[vIetDrIfTeR]

but if i swap the whole interior harness from a na supra to turbo supra will it work??because the turbo and stuff..

and is this a w58 drive shaft

 

[vIetDrIfTeR]

?