ati super damper + DM pulleys= what belt??

[slideways2004]

I have driftmotion underdrive pulleys and an ati super damper. What serpentine belt am I supposed to use??

I searched but could not get a definite answer

 

[tsuper92]

the stock belt should fit(stock crank pully with a/c.i have the same set-up

i see the front sump pan,what's the motor going in?

 

[slideways2004]

do you mean without a/c? i'm not running any ac stuff

motor is going in this car:
http://www.supramania.com/forums/showthread.php?t=108203

 

[tsuper92]

if your running the ati pulley without a/c pump on the motor,like in your picture.you will need the stock belt,which make's up for the larger diameter pulley.
the stock belt for a/c will work.try the belt that came off the motor.

 

[slideways2004]

if your running the ati pulley without a/c pump on the motor,like in your picture.you will need the stock belt,which make's up for the larger diameter pulley.
the stock belt for a/c will work.try the belt that came off the motor.

Motor never came with a belt. I'll see what I can do. If it worked on your motor it should be fine on mine

 

[tissimo]

Motor never came with a belt. I'll see what I can do. If it worked on your motor it should be fine on mine

take a rope, feed it through like a belt get that measurement then cut off 1-1.5" inches (for the tensioner). Go to autozone with your measurements and tell them you need a 6 rip xx inch long belt.