hey guy my reabuit shop put the arp bolt the one that goes for the oil pump clearance at the wrong place does somebody have the sheet from arp how to torque the bolt and the stud
realy thanks
realy thanks
arp main stud
- Thread starter sous
- Start date
have you not found it on arp's site yet?
and i believe it was 80ft lbs... but i would double check.
and REMEMBER, when you torque them, make sure there is plenty of moly lube being used. other wise the torque reading will be off.
and i believe it was 80ft lbs... but i would double check.
and REMEMBER, when you torque them, make sure there is plenty of moly lube being used. other wise the torque reading will be off.
sous - I have no idea what you just typed. Im guessing your english isn't that good or your drunk.