Aristo ECU? help me out guys!, 2jzgte ECU?

[mk34life]

hey guys,
can you help me out, bought a harness and ECU from here. What car did this ECU come off from? I was looking for an Aristo ECU for my supra. This ECU looks nothing like mine. Any ideas?

 

[suprabad]

Maybe someone more familiar with jdm stuff could help you, but they're probably going to need the model/production numbers off the ECM (it's called an electronic control module or ECM), and they're not legible on the photo's you posted. Are there any numbers stamped into it?

 

[webbs7mgte]

+1 look for numbers stamped in and check to c if there is a chasis code on it liek ma70 or jza80

 

[mk34life]

the only tag is the one seen on the photos. Looks like most of it has been peel off. bump...I really needed an aristo ecu.

 

[jdub]

Wrong section...moved.

 

[tlo86]

that looks like a beat up vvti one.

top is one you need

and the N/A one looks just like it (other two are for the 7m pre 89 and post 89 so ignore those hehe)

 

[Satan]

Does not look like an Aristo one... I have 4 of them. I'll have to dig through some pics to see if the VVTi one I had is the same as what you have pictured.

 

[annoyingrob]

the only tag is the one seen on the photos. Looks like most of it has been peel off. bump...I really needed an aristo ecu.

how badly?

I have one, but I prefer to sell it with the complete wiring harness I have too.

 

[Zazzn]

deff not aristo I own an actual aristo and it's not.

 

[foreverpsycotic]

nope, looks nothing like mine.

 

[tlo86]

but do you guys have a VVTI aristo one? it might well indeed be an aristo one just a much newer one. the picture i supplied is the one used on non vvti 2jz's

 

[foreverpsycotic]

but do you guys have a VVTI aristo one? it might well indeed be an aristo one just a much newer one. the picture i supplied is the one used on non vvti 2jz's

Nope, no vvti here, just good old 1jz-gte amazingness.

 

[suprastanger507mgte]

yeah there were definite changes in the part numbers for the Aristo ECUs.
Depending on the harness you have , you will need to get the correct ecu ofcourse.
It maybe an Aristo one but from different year :
JZS147
jzs161 - VVTI

 

[aphxero]

Looks like newer GE ecu to me.