I tried to search but found no results. I was wondering if the cold start switches on the coolant housing were the same between the GTE and the GE? All help is appreciated. Thanks!
Are the sensors the same?
- Thread starter xXSupramanXx
- Start date
looking at EPC there the same or at least Toyota dose not give a separate part number for a na or turbo
http://www.cygnusx1.net/Supra/Library/EPC/291420/part.aspx?S=89462
Looks like what ever one you have will work just fine
http://www.cygnusx1.net/Supra/Library/EPC/291420/part.aspx?S=89462
Looks like what ever one you have will work just fine
there is plug in difference yes. with the pigtail its not a problem. ive found that the cold start switch seems to be the same on almost any toyota from the 80's and early 90's. it seems to be a generic densu part but im not 100% on that, as i dont know if the temp for them to stop is different. all i know is with the pigtail my supra ran a cold start switch from a 4ag.
Really need to have a good look at the EPC. Clearest difference is the whole ignition assembly. With the NA having a distributor and Turbo having coil packs and cam sensor.
I think you need to look at it.
http://www.cygnusx1.net/Supra/Library/EPC/291220/part.aspx?S=89462
There is no designation for turbo and n/a. Both work on both engines.
http://www.cygnusx1.net/Supra/Library/EPC/291220/part.aspx?S=89462
There is no designation for turbo and n/a. Both work on both engines.
The plug designs are the same, but the setup is different is what I was trying to get at. I generalized all the plugs in the car. I'll leave a sticky on the monitor reminding me NOT to view forums right after waking up 