Anyone running one of these?

[CajunKenny]

I was wondering if anyone is using one of these and if so, is it holding up? The bends look like it'll clear the P.S. Res.

I bought one off of shebay from a different person and it didn't clear the P.S. Res. so I returned it.

Any thoughts...?

Edit: Oops!!! Here ya go...

http://cgi.ebay.com/ebaymotors/Supr...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Supracentral]

I was wondering if anyone is using one of these and if so, is it holding up? The bends look like it'll clear the P.S. Res.

I bought one off of shebay from a different person and it didn't clear the P.S. Res. so I returned it.

Any thoughts...?

I have one of those and mine doesn't bend much at all.

(There's no picture in your post dippy... We have no idea what you are talking about...)

:ttiwwp:

 

[IwantMKIII]

hmmmm, works great for me

 

[CajunKenny]

I added the link to the OP; but, here's the link for convenience!

http://cgi.ebay.com/ebaymotors/Supr...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Sorry guys. I'm pretty brain-dead tired...

 

[IwantMKIII]

ahh, now it all makes sense

That looks like a lot like the cooleze pipe. For that money you might as well get the cooleze pipe to be sure

 

[Rennat]

i made my own out of two bends of metal... its not hard at all, and you can weld the stock metal fittings that are in the OEM intake too btw. i used a fluxcore welder, so it welds good enough for me to look at. Its not a structural part anyways...

 

[Poodles]

Ahem...

http://www.supramania.com/forums/showthread.php?t=85838

 

[CajunKenny]

What would I do without you Poodles!!!

Thanks... It looks like I'll pass on both the one I inquired about and the Cooleeze one. Fitment issues seem to be the prevelant problem with these things. That's exactly why I returned the one I had previously purchased.

The search continues. Sigh...

Cheers and Merry Christmas!!

 

[CajunKenny]

i made my own out of two bends of metal... its not hard at all, and you can weld the stock metal fittings that are in the OEM intake too btw. i used a fluxcore welder, so it welds good enough for me to look at. Its not a structural part anyways...

I can't weld. :cry:

 

[Rennat]

go to an exhaust shop, or any other aftermarket shop that does installs... it wont cost you $20 if you have them do it, but it wont be nearly as expensive as the one on ebay...