Anyone Know the Thread and Pitch size for R154 Bell Housing to Case Bolts?
- Thread starter Zumtizzle
- Start date
m8 1.25 or m101.25 but i pretty sure it is m8
and about 30 lagth
this off the top of my head but seam, right to me
and about 30 lagth
this off the top of my head but seam, right to me
Something tells me its m10x1.25 (as are a lot of things on the supra from what I have seen). PM jeff lange or wait for him to respond.
Zumtizzle;891628 said:
Did anyone get a definitive answer one this? Also does ARP make a kit(hey why not) for it or just piece together with high grade hardware store fasteners?
...Yes, its an old thread but its what I found when I searched, rather than start a new thread I figure just reply.
iwannadie;1211977 said:
Seems like you're looking for flex plate or arp bolts for them.
since you're auto best bet would be the dealer.
Zumtizzle;1216418 said:
No, despite what my sig may imply I am looking for the r154 bell housing to case bolt size....
Bellhousing to case bolts are infact M10 x 1.25.... I dont recall the exacty lenght but as long as the stick out past the bellhousing by atlest 1/2" you'll be fine. Longer would be better but you dont want to bottom out so just dont go to long.
The bearing retainer housing in the face of the trans using M8 x 1.25...
The bearing retainer housing in the face of the trans using M8 x 1.25...
Well Then Yea.
i'll confirm.
It's M10X1.25 with a length of about 30 or something (i forgot. sorry)
i'll confirm.
It's M10X1.25 with a length of about 30 or something (i forgot. sorry)
Mk3runner;1216454 said:
Haha, you must be like me and save every nut and bolt that you dont end up using dont you...
I've got like 3 or 4 5gallon buckets filled with nuts and bolts that are nothing but metric, then probably 2 more that are nothing but SAE...
What about the bell housing to block, anyone got those sizes?
Im going to be doing my 5 speed swap and want to try and track down all new fasteners ahead of time to be ready. I know Ill end up missing something but the more I can stock up now the better.
Im going to be doing my 5 speed swap and want to try and track down all new fasteners ahead of time to be ready. I know Ill end up missing something but the more I can stock up now the better.