Anyone here run a 12 Row Oil Cooler? And Mounting Locations besides the radiator.

[JDMMA70]

Im sitting here looking at an oil cooler that can mount in the factory location without too much trouble has anyone here mounted one of these B&M Coolers in the factory location with success?

http://www.summitracing.com/parts/bmm-70265/overview/

or

http://www.summitracing.com/parts/bmm-70273/overview/

The smaller one is a 12 row and has a 7,500 BTU rating is that sufficient enough being that it will get plenty of air via the front air dam?

Any advice and opinions welcome. I was going to mount it on the rad like i did my Trans cooler but Looking at it I do not believe the -10 hose will be able to squeeze around it.


Thanks for your time.

 

[hvyman]

I will be using a 19 row earls cooler to mount between the rad and ic with space inbetween.

Just used a piece of metal to go between the ic mounts to mount it.

 

[bhmsupra]

Verry Good write-up here.....
92NSXs Build Up thread

http://www.supramania.com/forums/showthread.php?74301-92nsx-s-supra-build

 

[Mr Bojangles]

I welded some bolts to the bottom of the bumper support and left an inch and a half between the I/C and the oil cooler, works great.