Another ID the Connector thread on my 1J

[honestabe]

This connector plugs into the connector that sticks out on the stock 1J ECU. What do the 2 wires going into the connector go to? It's not on the ECU pinout diagram.

 

[Bigzavs]

i cant remember exactly what it is, but its not necessary for the car to run

 

[JonoTurbo]

It contains the wiring for the sub throttle sensor, which basically is used to detect faults in the TPS. So while it's not required, it could be useful.

 

[honestabe]

can I wire them into my standalone?

 

[hvyman]

a lil off topic but what happens when you get a problem with a green wire under there?

 

[honestabe]

LOL. If that happens I'll trace it to the connector, where the original wire still is. That will tell me what the wire actually belongs to. Trust me, I plan on replacing every wire with a properly color coded wire. In fact, I have a coffee can full of wires that are individually separated and coiled that I pulled from a 7M at the junk yard. That collection should get me most of the color combo's I need.

 

[Zumtizzle]

a lil off topic but what happens when you get a problem with a green wire under there?

You burn the car down. or stomp up and down.