another HX35 questionbut on a 2jz
- Thread starter TLDriver
- Start date
Those cams probably helped quite a bit. I was hoping you were on stock cams, my goal is 400whp at no more than 18psi, lol.
Hp wise, I'm sure it's the cams but I'm not satisfied with this setup.
I spool 17psi 4-4200rpm, peak hp is @4800-5200rpm and it pulls so hard i have to be super carful not to bounce off the 7200 rev limit.
I think the stock cams would be a better all around setup, spool sooner and the power will wind down towards the rev limit, you just give up some peak hp.
I think you'll still hit that 400 mark without a problem.
I spool 17psi 4-4200rpm, peak hp is @4800-5200rpm and it pulls so hard i have to be super carful not to bounce off the 7200 rev limit.
I think the stock cams would be a better all around setup, spool sooner and the power will wind down towards the rev limit, you just give up some peak hp.
I think you'll still hit that 400 mark without a problem.
those msd coils, did you have to change your ignition system or are they direct replacements for JZ coils?