AN size for power steering hose need to know ASAP

[jza240sx]

i want SS lines but i have no idea what the AN size is from the reservoir to the pump. Anyone know

 

[JonnyRedline]

driftmotion has a ss line kit for the power steering pump essay.

 

[OneJArpus]

driftmotion has a ss line kit for the power steering pump essay.

Yes, but that is from the rack to the pump, he's looking for Res. to pump

 

[Cz.]

This may not be the exact measurements, but it is what I'm doing.
10 AN from reservoir to pump
DM line from pump to rack
6 AN from rack back to reservoir.

 

[jza240sx]

This may not be the exact measurements, but it is what I'm doing.
10 AN from reservoir to pump
DM line from pump to rack
6 AN from rack back to reservoir.

10AN is to small from resorvoir to the pump.

 

[Loose Seal]

How do you figure?

-10 reservoir to pump.
-6 everywhere else.

That's the standard for PS that I've seen, installed, used, etc on several cars of various makes and purposes.

 

[jza240sx]

How do you figure?

-10 reservoir to pump.
-6 everywhere else.

That's the standard for PS that I've seen, installed, used, etc on several cars of various makes and purposes.

because i put 10AN hose on my pump and it doesnt work...6 works but not the 10AN..

 

[Evilempire1.3JZ-GTE]

Could you specify which case didnt work for you?
You mean the -10 wont work from pump to reservoir,
or -10 doesnt work from cooler to reservoir/ from pinion to pump.

It looks like -10 will work from the reservoir to the pump inlet!
It looks like its all flanged for a rubber hose though but I am sure it would be mostly for looks anyways since its not under pressure and the rubber hose works better you could maybe do a dress up kit for braided hose apearance or even tap coupler fittings for 100% an hose -10 lots of extra work though.

 

[Fletch124]

My 2j pump to resevoir inlet is smaller than -10... Works fine. -10 is larger in inside diameter than the 2j pump inlet.

I dont see why -10 is too small.