Alarm System Hookup

[OfnaRcR4]

I'm having some troubie hooking my alarm up.

Their instructions:

H1/2 WHITE (+/-) light flash output
As shipped, the H1/2 WHITE wire should be connected to the + parking light ware. If the light flash polarity jumper is moved to the - position, this wire supplies a - 2- mA outpur.

So where exactly does the white wire go?

 

[isnms]

check my sig for an alarm installation write up
hth

 

[OfnaRcR4]

Thx bud.:icon_bigg

 

[OfnaRcR4]

Sry but i have another question.:cry:
I got everything working except the door locks and factory alarm hookup. I am confused as to where i should wire in the 4 pin blue and the 4 pin green. I was all huddled in the kick pannel and just couldn't figure it out.

Refer to isnms writeup http://www.snapdrive.net/files/91304/Supra/MKIII_ALARM_WIRE_GUIDE_wRelay.pdf

 

[isnms]

If you are keeping the stock alarm when installing an aftermarket; You have to send it's lock/unlock pulse to the door lock solenoid and arm/disarm the stock alarm.

 

[isnms]

So you got it? That helped?

 

[OfnaRcR4]

Yeah. Thanks budder.

 

[isnms]

Cool, good to know.