I have been dealing with this issue for a couple of weeks now and at a loss and just out of ideas as to what to do/ look for.
I am incountering cam sync error with the AEM V1. While the car is idleing there are no errors and the AEM doesnt drop the sync tooth. I have narrowed it down to being the cam signal as when logging the crank signal is fine. I have replaced the shielded wire loom going to the cps and grounded the shield at the ecu side. This didn't change the situation.
What i see on the AEM is that at random rpms and load levels the ems encounters a sync error and the sync tooth drops to zero for a split second then it finds it again and returns to its original value. I don't think it is the cps as it works fine the majority of the time.
If anyone has any ideas, im open to them.
I am incountering cam sync error with the AEM V1. While the car is idleing there are no errors and the AEM doesnt drop the sync tooth. I have narrowed it down to being the cam signal as when logging the crank signal is fine. I have replaced the shielded wire loom going to the cps and grounded the shield at the ecu side. This didn't change the situation.
What i see on the AEM is that at random rpms and load levels the ems encounters a sync error and the sync tooth drops to zero for a split second then it finds it again and returns to its original value. I don't think it is the cps as it works fine the majority of the time.
If anyone has any ideas, im open to them.
