AEM V 2 base map

Dingoboy

Dingoboy

New Member
Dec 25, 2009
235
0
0
Tampa, FL
I have a Driftmotion AEM V2 sitting in a box, waiting to be installed right now. I haven't yet powered it up, but I could give it 12 volts & plug a laptop in to copy the map & send it to you if you like. Will e-mail you as well.
 
seoul4korea

seoul4korea

New Member
Nov 6, 2008
620
0
0
San Diego, CA
www.supraforums.com
Dingoboy;2034518 said:
I have a Driftmotion AEM V2 sitting in a box, waiting to be installed right now. I haven't yet powered it up, but I could give it 12 volts & plug a laptop in to copy the map & send it to you if you like. Will e-mail you as well.
Click to expand...

Got your email mate, thank you so much and let me know if you need anything
 
P

Press22

New Member
May 5, 2014
8
0
0
Las Vegas
seoul4korea;2091875 said:
Do you still need one? I figured out my issue. I got mine from driftmotion but I updated the firmware. When I did this it fucked up how the ECU would take the tune. Went back to the old firmware and uploaded it and it's good to go again.
Click to expand...
Any more info on which firmware is correct? I may have accidentally done the same thing.
Need base map also. My email is ipress22@gmail.com
 
N

Nightshiver92

New Member
Oct 20, 2017
1
0
0
Council bluffs
it would be awesome if you could send me a base map I'm new the any form of tuning but took a lightly used aem v2 6050 Honda box with harness from driftmotion as a trade for an engine as the kid blew his 7mgte needless to say one look i knew the fuel map was shit and i wont start my car on said calibrations as i don't want to blow my engine up as well any help would be awesome currently fresh rebuild stock injectors 2.5in fmic from driftmotion 3in divorced downpipe areomotive fuel pressure regulator set to 38psi at idle with vac line hooked up stock ct26 but i will be changing it on Monday for an unknow sized ct comp ball bearing turbo/boss series jr turbine housing for factory manifold but if you send me a stock setup or a 550cc setup I'm sure i can make it work cant be worse then what was on it
 
seoul4korea

seoul4korea

New Member
Nov 6, 2008
620
0
0
San Diego, CA
www.supraforums.com
Nightshiver92 said:
it would be awesome if you could send me a base map I'm new the any form of tuning but took a lightly used aem v2 6050 Honda box with harness from driftmotion as a trade for an engine as the kid blew his 7mgte needless to say one look i knew the fuel map was shit and i wont start my car on said calibrations as i don't want to blow my engine up as well any help would be awesome currently fresh rebuild stock injectors 2.5in fmic from driftmotion 3in divorced downpipe areomotive fuel pressure regulator set to 38psi at idle with vac line hooked up stock ct26 but i will be changing it on Monday for an unknow sized ct comp ball bearing turbo/boss series jr turbine housing for factory manifold but if you send me a stock setup or a 550cc setup I'm sure i can make it work cant be worse then what was on it
Click to expand...

PM me your email so we can talk and make sure this one will work for you
 
You must log in or register to reply here.
Top Bottom