AEM EMS Base map for a 7mgte

[wesbeech]

I cant find one anywhere and the one on the aem forums comes up as a dead link. Please help.

 

[survyor2]

Doesn't the AEM Pro come with the base maps? I installed my AEM EMS over the weekend and by no means am I an expert, but look under the AEM PRO/Toyota directory for 30-1130.

Dennis

 

[empera]

mods?

 

[bfr1992t]

Rtfm. ;-)

 

[wesbeech]

OK here is the mods that i would assume matter.

.020 over je's, 274 cams, ported polished, 1mm os valves, tubelar turbo manifold holest h1c about 58ish mm, 3"dp 4" downpipe back exhaust, daul walbro 255 pumps in tank, aeromotive afpr, 750 cc injectors, 3 msd twin tower coils, long runner ffim with stock tb, 24x12x3 core fmic, 2.5 piping tial bov, aem 5bar map sensor, gm air intake temp sensor, autometer fuel presure gauge wired in to aem to log fuel presure and do hard ing/fuel cut if presure drops, snow water meth i think 725 or 750 liter per hour nozle.

I thinks that it if there are any aeras i forgot let me know.

 

[empera]

got pretty diff. setup, i got 2 maps...one on 550's and one on 780's both on gm 3bar map.
61mm turbo + stock internals.

 

[wesbeech]

got pretty diff. setup, i got 2 maps...one on 550's and one on 780's both on gm 3bar map.
61mm turbo + stock internals.

It should be easy just to change the map sensor in the program.

 

[Tun_x]

Wes I have everything ready just, get the motor in and I will walk you through everything, and get you up and running

Jason

 

[wesbeech]

Wes I have everything ready just, get the motor in and I will walk you through everything, and get you up and running

Jason

Ok works for me jason thanks.