Ok so I was wondering about doing this. I got the "locknut" loosened and was wondering which way the rod should turn to give the pedal more play?
Adjust Clutch Pedal freeplay?
- Thread starter lxjoshxl
- Start date
You want to make the distance between the pedal and the master cylinder shorter. Just loosen the locknut slightly then turn the rod until the locknut becomes tight again like it was. Righty tighty, lefty loosy.
If only the TSRM was 2 pages:
page 1 - Lefty Loosey
page 2 - Righty Tighty
Whats wrong with the pedal now?
You can see which way the pedal goes when you move the rod, then tighten the nut. As the clutch wears the pedal will drop over time and will have to be adjusted back out to about 1/3 to 1/2" freeplay.
Then bleed it.
page 1 - Lefty Loosey
page 2 - Righty Tighty
Whats wrong with the pedal now?
You can see which way the pedal goes when you move the rod, then tighten the nut. As the clutch wears the pedal will drop over time and will have to be adjusted back out to about 1/3 to 1/2" freeplay.
Then bleed it.
Well the guy who i bought the car from just put a brand new one in. And on the way getting it home it was slipping bad. There is no freeplay whatsoever so I will do what planemos said and see if it gives it atleast a little play. thanks guys