AC going back in, need input on flush

[grimreaper]

Does someone have the dimensions of the stock 89+ condensor? I saw a couple of pics, but would like to have something exact, so that I can find a suitable universal one to replace it.

Pics from multiple angles would be great, so that I can see the orientation of the ports.

14 X 24 inches not sure on the thickness, 1" iirc. Just put mine back in or id take more pics... nothing special except the ports HAVE to face forward unless you do a right angle adapter on the ends (very tight fit if you do but a 22-23" width should provide the clearance)

 

[Satan]

Thanks! Gonna go junkyarding this weekend to see if there are any other Toyotas with the right dimensions, same ports, and same location of the ports.

There are MANY aftermarket/universal options, but they all require the fabbing of lines to their ports. All kinds of hoses & fittings available though.

 

[Poodles]

I'll try to get better pics of mine, it's still in it's vacuum packing though...

 

[figgie]

AN fittings or lots of work to use the metric fittings.

The stock condensor Aluminum? (got to check mine).

 

[Satan]

Actually, ordered a "stock replacement" parallel flow condensor today. I should have it by next week. I am a bit skeptical, since they said it would take a few days to manufacture, but had a part number ready, and seemed hesitatant with the price.

The person I talked to said she'd talked to the technicians and that they would do it. I also asked for her to re-confirm that it would be parallel flow (several times).

If ya'll can wait a week or so, I will be able to tell you how things look. The cost was $155 (before shipping). Well worth it, considering the pieces & fabbing that would have to take place to use one of the ~$90ish universal units.

I'd hate to have ya'll order one and it not be any good, so I don't want to post all that info yet. If you're REALLY in that much of a hurry, send me a PM for the info.

Stand-by!