A/C after 2jz swap

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
40
Melbourne, FL
what do you mean?

I had fal fans on my 2jz swap and it was cold.. I assume clutch fan and the 2 stock fans would pull as much air....
 

jugodegolf

Supramania Contributor
Apr 5, 2005
2,369
2
38
Phoenix,AZ, United States
tissimo said:
what do you mean?

I had fal fans on my 2jz swap and it was cold.. I assume clutch fan and the 2 stock fans would pull as much air....

the 2 stock fans don't fit. IC pipes go there currently.
p759522_1.jpg
 

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
40
Melbourne, FL
ahh.. i see what you're saying.. get a stock fan shroud, block off the stock fan holes in the shroud, and put the stock or an aftermarket pusher on the condenser.. it will work good then.. you'll be suprized how much just the shroud will do
 

jugodegolf

Supramania Contributor
Apr 5, 2005
2,369
2
38
Phoenix,AZ, United States
tissimo said:
ahh.. i see what you're saying.. get a stock fan shroud, block off the stock fan holes in the shroud, and put the stock or an aftermarket pusher on the condenser.. it will work good then.. you'll be suprized how much just the shroud will do

Shroud is on order. not sure what u mean w/ pusher on the condeser but adding to my list of to do's.

Thanks Tissimo
 

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
40
Melbourne, FL
90% of most stock turbo auto cars have a pusher fan on the condenser, though I've seen some manual cars have it. that plus a good condition clutch fan should work fairly well..


you can kinda see it in this pic a little
sm_photo_missing.jpg