My friend has a 93 GS300 he is wanting to swap. He got a 93 Aristo engine set. Complete engine, trans, ignitor, etc. I searched and couldn't find any info on this so I was wondering if any of you guys could tell me whatelse is needed to do the swap. I've heard the front yoke on the driveshaft is different. The trans linkage on the GS is too long. What else is needed to make the swap work? Does anyone have any wiring diagrams on it? Any CORRECT help at all would be greatly appriciated. I'm not looking for guessing answers. I would love to hear from people that have performed the swap or seen one swapped in person. Thanks guys!
93 GS300 Aristo swap Help!
- Thread starter supraracer49
- Start date
supraracer49;1467995 said:
I have tons of wiring info from swapping so many of them
Lemme know if you have a specific question.
clublexus.com
The swap is pretty much drop in and go.. maybe extend a the body wiring harness a bit.
The swap is pretty much drop in and go.. maybe extend a the body wiring harness a bit.
The wiring is super easy, just extend it that is it no pining required. everything and every plug connects.
Go to Clublexus.com and look at my build/swap thread. It was so easy I actually got bored, seriously.
Here is my build with most of the stuff documented :
http://www.clublexus.com/forums/gs-first-generation/436712-moejzs-build-swap-and-how-i-got-here.html
Go to Clublexus.com and look at my build/swap thread. It was so easy I actually got bored, seriously.
Here is my build with most of the stuff documented :
http://www.clublexus.com/forums/gs-first-generation/436712-moejzs-build-swap-and-how-i-got-here.html
Sweet thanks guys! So there is no pinning required for the body plug like on a jz swap? I heard there is 2 ecu plugs and 1 body plug correct? Is the shift linkage being too long correct or is it the right length?