Before you say anything, I've already checked the oil for signs of clouding. There are none. The coolant level does not change. As for the problem...
Recently, I've noticed that it takes a long time for my car to warm up. The gauge sticks below C for at least 5 minutes before slowly creeping up. I am worried about this. Also, Occasionally, after extended periods of driving the car begins to slightly overheat, or the temp gauge creeps above the middle and approaches the H zone. This only happens when the RPM's drop or at idle, then will slowly revert to stress free temps once I'm traveling quickly again. When it does this, coolant is pushed into the overflow bottle, to the point it fills up. It used to be that my car would warm up within a mile of driving, now it's taking 3-4 miles of driving and has me worried. I have a feeling it might be the water pump going out, but I want to be sure before I go forking out the money for parts. No codes are showing up, and it hasn't been overheated, and the head gasket checks out on the pressure test.
It's also worth mentioning, that my heat suffers the same delay as my temp does, and also seems to blow at only 50% of the heat it normally should.
Recently, I've noticed that it takes a long time for my car to warm up. The gauge sticks below C for at least 5 minutes before slowly creeping up. I am worried about this. Also, Occasionally, after extended periods of driving the car begins to slightly overheat, or the temp gauge creeps above the middle and approaches the H zone. This only happens when the RPM's drop or at idle, then will slowly revert to stress free temps once I'm traveling quickly again. When it does this, coolant is pushed into the overflow bottle, to the point it fills up. It used to be that my car would warm up within a mile of driving, now it's taking 3-4 miles of driving and has me worried. I have a feeling it might be the water pump going out, but I want to be sure before I go forking out the money for parts. No codes are showing up, and it hasn't been overheated, and the head gasket checks out on the pressure test.
It's also worth mentioning, that my heat suffers the same delay as my temp does, and also seems to blow at only 50% of the heat it normally should.
Last edited: