89 toy truck, Rolling truck down hills are fun

[NashMan]

well i have mroe then one project


this is my other one i just about finished and the cage work but there still more to do lots more

lower my fuel cell down

re do my shock montes since i just swaped in new rear axle and spring perches

i plan to make anty wrap bar but not tell i take it out for it's frist test run


for the front stuff that i have to do is relocate my steering box and change up the front caster to make turning easier when i locked int he front end


and fi i find time i am going to be ditching the 22re for a ka24defor s13 wheil still useing the w56 trans


well here are so pic's

new 4 runner seats

new rear 4 runner rear axle whit cable based ebrake

axle parts

new trans tunnle for dual t cases had to be made since this is 2 wheel drive truck at one time
will be covered in stainless

cutting the back shit off sick of hitting trees with teh rear end going kinda for the the dove look but still have tire coverage

more cage work


well this is my truck :evil2:

 

[shaeff]

Pretty cool, Ryan. What kind of tube bender you using? I'm planning to get one next summer to make a tube bed for my Pickup since my bed is about rotted away.

 

[lppro]

nice man! i just picked up an 86 4x4 about a week ago. it had been sitting for 10 years! i might put a lil build thread on here.. there great little trucks!

 

[shaeff]

Yeah man, they're sweet little trucks. I love my '94. I was going to put up a build thread as I'm doing a 7m swap but I delayed it until summer. Winter is right around the corner, and the truck has wintertime DD duty so I don't want to run into any issues. June is looking pretty good.

 

[NashMan]

tanks guys as for the trube bender iut reall depends if you going to use sc40 pipe or dome

half my truck is dome the back is sc 40 for extra weight


as for the bender k2 is a good bender


i thought about 7mge swap but really it pretty cramped in there and well i not fan of breaking drive trainin like twigs

i had a 3 slow befor that i mucked with got good amonte of power out of it tell the pinot evey wheeling trip i blew a rear end up grrrr but stilla great truck thou kinda missed it but to tipy and heavy

removed egr
removed emmsioes
felx alight fan
apexi neo
7mge afm
7mge coil
duag thory header
ajustbale fuel reg
m300 wide band
cuostom intake pipe
7mgte altanator


all that was leaft that is need was a set of cam shafts from colt cams

ps my 4runner did nto sound like 3 slow at all in any forum sounded pretty nice


so for now i going to stick wiht eh 22re and hold on my ka24de swap

yes tou herd me a dohc nissan motor 150 hp and 160 torq



but thsi is what my truck looks like right now not fully done or the latest pic's

had to add in some bling

 

[NashMan]

been a wail for an up date but this what has been done

t cases done (say no to ramming and hello to crawl)

ps that stuiped lock out pin for the tiwn sticks, who the hell has magnetic punch that long ? I was going to go buy one but fuck it BFH time
so i used my brass hammer and pounded the other side of the cases tell it shook loose and fell out

WIN

truck got painted with good old paint brush gonna do the rest of the truck when i get waganer house painter gun

 

[shaeff]

Sick. Action shots/video when you get around to it!

Obviously w/ the 22re you've got a gear driven transfer case, what gears and adapter did you use? Marlin? Trail Gear? And what ratio did you end up with? The 4.7's, or dual 2.28's?

 

[NashMan]

i use trail gear manily, marlin stuff is good and all but there stuff over priced and the same as tg (both have there ups and down)

as for gearing i useing dual 2.28 for around here that is nice gear setup to have since wheel speed means alot out here
plus i have 5.29's in my diffs


the 22r is going to be replaced with 1jz again for stuiped killer reliablity and able to stay on rev limter all day long

i gonna replace the stock tiwns with a stock ct26 to keep the power level down and save space

and if i go propain then i will need 2jzge head so i can run distributor

but that will be later date

 

[shaeff]

Nice. I'm more of a "pick a good path" than "smash the truck 'til it gets up" type of driver anyway. I don't think I have a need for 4.7 gears so I was also considering dual stockers. I almost had an extra t-case for $30 a few days ago but the deal fell through. I'm still on 4:10 gears, which is why I considered the 4.7's.

Keep updating this, I love this stuff.

 

[NashMan]

it will be slow but i guess i can keep updateing it


what next to do is streeing box relocation and mabye re do my frotn hanger and lower it witch will fix my caster issu a bit

 

[87mk111]

1jz in that truck will be pretty cool. im in for moar.

 

[NashMan]

i migth even pop in 3sgte might be cheeper option at this point as well just need to toy van bell very easy to find and cheep

the 1j to w58 i ned the 2jzge bell and fly wheeland is not that comon

but this what have been up to

 

[NashMan]

got some stuff done


monted brakes line's
added diff armor
shifter plate thing use cv axle boots as shitfter bag nice and cheep and easy
and installed my light's
made my 4runner e brake cables worth witht eh truck e brake system

very much diffetn but i made them work wiht some cuttign weldding and all that junk




next is to make stinger and finshed wireig my truck lights and make drive shafts

 

[bioskyline]

very very nice! where in bc you from/or the truck from. i swear ive seen that truck before.......

 

[NashMan]

victoria

 

[NashMan]

well truck is on the road not fully done but on the road


took it out and broke it too hahhaha and tested out my cage as well


2 end over enders and 2 barrle rolls tell a tree stopped me


damge big hole in my roof were rock ppunched though and bent rim and snapped a set of chevy 63's in half all 3 leasf

i guess a 200 foot high hand stand might do that and wrape then in to death

---------- Post added at 11:43 AM ---------- Previous post was at 11:40 AM ----------

---------- Post added at 11:44 AM ---------- Previous post was at 11:43 AM ----------

 

[toyotavince]

damn you werent playing bout rollin into a tree. thats crazy, it a good thing you had that cage there. the trucks lookin good. i see a friend of your is running a propaing setup, nice.

and those trails your guys are smashing on are very nice as well. canada looks fresh.

 

[bioskyline]

haha look like fun. i miss my 4x4 now!.

 

[xzeror]

thast looks like a lot of fun lol

 

[NashMan]

ya it's alot of fun


only thing that sucks abotu wheeling is you break stuff but my rig is pretty good now for not breaking



but i got bord today and made the NM power package

custom 5mge afm (bord swap)
87 to 88 7mgte thottle body swap 22re tps and re did the linkage
apexi sfac 2 if i can get it to work wiht this wacky scaleing



here some pic's