7mgte wont come out??

[Insidious Surmiser]

^ How hard is it to reinstall though? Just curious

all i had to do was jack up the subframe (it was rested on a jack) and it went onto the studs on the frame... the engine mounts were also very easy to line up (held by engine hoist)... also, it didn't throw my alignment off any at all

 

[tercelica]

hmm... thanks alot guys.. I'mma take it out later on tonight then

 

[tercelica]

You gotta pull the shift fork out! It just snaps into the trans, remove the inspection cover on the bellhousing and pull the fork out.

OK.. i have everything ready up till the pull fork.. I have the clutch release cylinder off, and the engine still hanging on lift. What I want to know is how to pull out that fork... I have that cylinder off, but the fork wont come out.. bolted?? i dunno.. i'm doing this in minimal light here... the engine is still locked up.. i just don't know how to yank out the fork...