7mgte longblocks pre built for higher hp ?

[jason7mgte]

Anyone sell a complete longblock with forged pistons,mhg,arps , whatever oil mods needed , ready to bolt on my accessories and drop in ?? one that will not develope knock . assumming I have a new oil cooler and lines, 550's lex maf, full 3',fpr, sfac and a proper dyno tune done by someone with lots of mkIII excerience??
only talking 400-425 hp
price ? warranty ?

Just dont want to spend months sending shit to the machine shop, finding parts, then install to find they did not do a quality job. There are so may people who bought a jdm or bought a reman or had a local rebuild done that took a shit within a few thousand miles. I would rather spend the extra to make it a 1 time thing and drive the car for another 100,000 If I could buy a 100% new toyota longblock swap out the headgasket and bolts and go I would however that does not exist at least not that I can find......:icon_conf

 

[bwest]

email Rich (suprarich) he has 2 shortblocks for sale, and I'm sure he can source a head for you if need be. He is also in the misc vender section

 

[starscream5000]

I think Rabidchimp does this...

 

[supradan22]

You can buy my 7m for 2 grand its in my build thread its built.

0.40 over sized pistons haven't ran the car yet so 0 miles.

has an n/a intake cam for the higher lift ARP all the way around everything been changed ill include hoses and belts and gaskets. Plus a t4 manifold and intake manifold.

Cant really warranty it because a bad tune would kill even a bullet proof motor.

 

[bwest]

I think Rabidchimp does this...

they sell jdm longblocks that are 'looked' over - nothing is replaced unless it is in dire need.

a search here would show that.

not a good recommendation.

 

[bwest]

has an n/a intake cam for the higher lift.

This is not quite correct either.

from mkiiitech:
NA/Turbo Cam differences-

Only the NA intake cam is different. It has LESS lift and MORE duration than the turbo version. This is good for low end power/tq, but rather bad for top end power. There have been a few dyno results showing some gains, but they were on rather stock cars. It really depends on what you want to do and what your goals are...

http://www.mkiiitech.com/forums/viewtopic.php?t=156&highlight=n+cam

 

[Disced]

Good info, bwest. You can buy an assembled stroker motor for something like 6k? lol...

 

[supradan22]

This is not quite correct either.

from mkiiitech:
NA/Turbo Cam differences-

Only the NA intake cam is different. It has LESS lift and MORE duration than the turbo version. This is good for low end power/tq, but rather bad for top end power. There have been a few dyno results showing some gains, but they were on rather stock cars. It really depends on what you want to do and what your goals are...

http://www.mkiiitech.com/forums/viewtopic.php?t=156&highlight=n+cam

Wow thanks I was miss informed I didn't know that.

 

[bwest]

No prob man. good luck with the motor

 

[starscream5000]

they sell jdm longblocks that are 'looked' over - nothing is replaced unless it is in dire need.

a search here would show that.

not a good recommendation.

And that's why a person inquiring about buying a long block would do their research on them first before buying something like a long block out right .

 

[jason7mgte]

correct willing to spend the money but I want it right THE FIRST TIME. If you can help please feel free to post or pm me .

 

[Stretch]

If you want something that is toyota-good buy a toyota short block. Brand new block, pistons, rods, everything. They still sell them if I recal correctly for about $2400. Then just get yourself a mhg, and head, or you can buy a brand new head from toyota again, I get them here for $1200 ish. Probably get some sort of warranty from toyota too if you buy it pre-assembled. Just another thought, as you don't need forged for 425hp, although it could be a good idea, it's not a necessity.
eric

 

[jason7mgte]

ok then WTF is wrong with my local toyota dealer they are saying discontinued on both ..... does anyone have the part #'s or work a yota dealer in parts ??

 

[suprarich]

I can get a new toyota short block in 1 week. List price is like 3200.00 ish.
You can pm me for a price, I try to never do business in open forum. The other built block I have, you would prob. want to finish yourself. The more work I do to it, the more I would need for it.

 

[starscream5000]

Maybe your dealer is a dumb ass or they are just checking in your state only? :dunno:

 

[Gilsdorf]

These guys seem to know their stuff, I've only bought bolt-on stuff from them so I don't know about their quality, or if they have a warrenty ontheir engines (you have to send your core to them).

http://www.racetep.com/7mgt.htm

Matt

 

[Jaguar_5]

Jtamulius lists exactly what you're looking for at his website, www.notrice.com

 

[GrimJack]

I think Aaron over at Driftmotion does these as well. Can't hurt to send him a PM.